PLAYING A CD
1. Open the CD Door (12) by gently pressing on the CD DOOR OPEN / CLOSE (13).
2. Insert a CD with the label side facing UP.
3. Close the CD Door (12) by gently pressing down on the door with your finger.
4. Press the FUNCTION button (17) until CD appears on the LCD Display (9). The
player will automatically show the total number of tracks (songs) on the CD on the
LCD Display (9).
5. Press the PLAY / PAUSE / FM STEREO button (5) to start playing the CD. Press the
PLAY / PAUSE / FM STEREO button
(5) again to momentarily pause playback. To
resume playback press the PLAY / PAUSE / FM STEREO button (5) again.
6. To Stop playing the CD press the STOP / BAND button (3).
SKIPPING TRACKS (SONGS)
• To skip to the next track press the NEXT / F.FWD button (2)
• To move to the beginning of the current track press the PREVIOUS / F.REV button (1)
• To skip to a previous track press the PREVIOUS / F.REV button (1) multiple times in
a row until the desired track is shown on the LCD Display (9).
SEARCHING TRACKS
• While playing a CD press and hold the NEXT / F.FWD button (2) to scan Fast
Forward through the current track. Release the button when you reach the desired
portion of the track you want to hear.
• Press and hold the PREVIOUS / F.REV button (1) to Fast Reverse through the
current track. Release the button when you reach the desired portion of the track you
want to hear.
PROGRAMMED PLAYBACK
Up to 20 tracks of a CD can be programmed to play in any desired order.
1. To set a Program order, first make sure the CD is not currently playing by pressing
the STOP / BAND button (3)
2. Press the PLAY MODE / PROGRAM button (7). The LCD Display (9) will show “01”
3. Press the NEXT / F.FWD (2) or PREVIOUS / F.REV (1) button to until the number of
the first track you want to program is blinking in the LCD Display (9).
4. Press the PLAY MODE / PROGRAM button (7) to program the track. The LCD
Display (9) will automatically show “02”.
5. Repeat steps 3 & 4 to program up to 20 different tracks.
6. When you have finished selecting tracks, press the PLAY / PAUSE / FM STEREO
button (5) to start playing the CD in the order you have programmed. The LCD
Display (9) will show “PROG” during Programmed Playback.
7. To stop Programmed Playback press the STOP / BAND button (3) twice. The
“PROG” indicator will automatically turn OFF.
REPEAT PLAYBACK
• To Repeat a Single Track press the PLAY MODE / PROGRAM button (7) once. The
word “REPEAT” will automatically start blinking in the LCD Display (9).
• To Repeat the Entire CD press the PLAY MODE / PROGRAM button (7) again until
the word “REPEAT” is ON (not blinking) in the LCD Display (9).
• To cancel Repeat Playback press the PLAY MODE / PROGRAM button (7)
continuously until the “REPEAT” is no longer shown in the LCD Display (9).
To Next Page
Loading...