BlueTrek METAL EVOLUTION - User Manual

“Vol +” button
“Talk” button
“Vol -” button
English
BLUETREK METAL EVOLUTION I 1
Before using your headset for the first time
You must charge it continuously for about 2 hours, until the red indicator light turns o.
Please refer to the “Charging the BLUETREK® Metal Evolution” section of this manual.
Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® Metal Evolution”
section of this manual.
Introduction
The BLUETREK® Metal Evolution headset is a wireless headset based on the Bluetooth® tech-
nology. It complies with Bluetooth® 2.1 protocol, supporting Headset and Hands-free profile.
The BLUETREK® Metal Evolution headset has 3 buttons:
· “TALK” button (main button)
· “Vol +” button
· “Vol -” button

Summary

Introduction

Headset Buttons

Lists the three primary buttons on the BLUETREK Metal Evolution headset: TALK, Vol +, and Vol -.

Charging the BLUETREK Metal Evolution

Charging Indicator

Explains the red indicator light and low-tone beep for charging status and recharge needs.

Switching the BLUETREK Metal Evolution ON and OFF

Switching ON

How to turn the headset on using the TALK button and observing the blue indicator light.

Switching OFF

How to turn the headset off using the TALK button and observing the red indicator light.

Pairing the BLUETREK Metal Evolution

Initiating Pairing

Steps to place devices near each other and activate the phone's Bluetooth discover mode.

Pairing Process

Details on phone detecting headset, using PIN code '0000', and selecting 'Connect'.

Making a call

Voice Recognition Calling

Steps for making calls using voice commands on the mobile phone.

Keypad Dialing

How to make calls by dialing the number on the phone keypad.

Answering a call

Ending a call

Adjusting the volume

Muting the microphone

Transferring a call from BLUETREK Metal Evolution to the mobile phone

Transferring a call from the mobile phone to the BLUETREK Metal Evolution

Call waiting

Placing;Retrieving on active call on hold

Wearing the BLUETREK Metal Evolution

Fitting the Earbud

Instructions on how to replace and fit the earbud for optimal comfort.

Additional features with some phones

Rejecting a call

How to reject an incoming call using the TALK button for about 2 seconds.

Redial the last number

How to redial the last number by pressing the TALK button for about 3 seconds.

Multi-point function

Instructions for connecting the headset to two different mobile phones simultaneously.

More information and Support

BlueTrek METAL EVOLUTION Specifications

General

Brand	BlueTrek
Model	METAL EVOLUTION
Category	Headsets
Language	English