LCD Instructions
Startup
Shutdown
Each icon represents an attached expansion battery. The AC200L can display up
to 2 battery icons.
The bar increases during charging and decreases during discharging.
The AC200L is charging in Turbo Charging Mode.
The ECO Mode is enabled to save power.
The remaining battery capacity.
The AC200L is charging in Silent Charging Mode.
The AC200L is charging from a DC power source, such as solar panels, lead-acid
batteries, etc.
The AC200L connects to BLUETTI App via Bluetooth.
The AC200L connects to BLUETTI App via WiFi.
When it lights up, the fan is activated and working properly. If it flashes, there
may be a problem with the fan.
The real-time AC charging power.
The real-time total AC output power.
The real-time AC output voltage.
The real-time AC output frequency.
The AC200L is charging from the home grid.
The DC output is turned on.
The AC output is turned on.
The AC200L is operating in Power Lifting Mode.
The remaining time of charging or discharging.
: Charging : Discharging
The temperature inside the unit is lower than -20°C (-4°F).
The temperature inside the unit is higher than 70°C (158°F).
The AC200L is overloaded
The AC200L is drawing too much current, which can cause damage to the unit
or any connected devices.
There's an issue with the AC200L, which may require troubleshooting or repair.
The real-time DC output power.
The SoC drops below 5%.
The real-time DC input power.
LCD lights up
LCD lights off
JUST POWER ON 15
EN
To Next Page
Loading...
