charging switch and scheduled charging switch according to your diverse requirements.
9.8 Grid Self-adaption Mode
If you can not charge the AC200L using a generator or unstable grid voltage because of
unstable voltage, you can enable the Grid Self-adaption Mode through the BLUETTI App.
9.9 Max. Grid Input Current
If the grid current doesn't match this setting, adjust the setting in the BLUETTI App.
Attention:
The AC200L allows a maximum grid input current of up to 12A.
If you need to increase the setting beyond the default, please contact BLUETTI Customer
Service and request a password to make the necessary adjustments.
9.10 Exit Setting Mode
To save your AC200L settings and exit the Setting Mode, press and hold both the DC and
AC Power Buttons at the same time.
Note: If you do not perform any operation in 1 minute, the AC200L will automatically exit
the Setting Mode, and no changes will be saved.
JUST POWER ON 23
EN
To Next Page
Loading...
