BLUETTI
- 13 -
12. FAQS (FREQUENTLY ASKED QUESTIONS)
W
hat devices can be charged/powered by BLUETTI EB70?
For the EB70, the maximum output power is 800W(US/JP) or 1000W
(EU/UK/AU), so please make sure the total power of your devices doesn't
exceed the figures, or the inverter will shut itself down.
Friendly Note: For some devices with a motor/compressor built inside, the
instant startup power maybe 2-4 times more than the rated power, which
may exceed the upper limit of the EB70.
H
ow long will the EB70 power my device?
Working time(estimation)=716Wh×DOD×η÷ (operating power of your
device)
Kindly Note: DOD indicates Depth of Discharge, η indicates inverter efficiency,
and the unit of device operating power in Watts. DOD=90% , η=90%.
The actual working time may vary under different situations.
W
hat kind of solar panel can charge this EB70?
The solar panel must meet:
1) Open Circuit Voltage (OCV) between 12V-28V;
2) Equipped with MC4 Connector. If your panel has an Anderson connector,
please purchase Anderson to MC4 cable separately.
Friendly Note: The actual charging time depends on the weather, solar
condition, and the angle of the solar panels.
C
an it charge and discharge simultaneously?
Yes, the EB70 supports pass-through charging. It features the premium
LiFePO4 battery and the advanced Battery Management System, so
please feel free to use it in a way that better suits your needs.
What does the ECO Mode mean, and can I turn it off?
Under ECO Mode(Default Setting), the AC power will automatically turn off
over 4 hours low(≤10W) or no load to save power drain. If you would like to
turn it off, please enter the ‘setting mode’ and switch ON/OFF. We hope
this design will benefit our users, especially CPAP users.
H
ow can I clean the EB70 power station?
Dry and non-abrasive cloths to wipe will be perfect. The EB70 is a versatile
tool for various adventures, simple cleaning from time to time is necessary
to keep the equipment in good condition.
Q1:
A:
Q2:
A:
Q3:
A:
Q4:
A:
Q5:
A:
Q6:
A: