BLUETTI
- 06 -
8. CHARGING
The EB70 supports A
C, Solar, Car, Generator, and Lead-acid battery five
charging methods.
Connect the adapter input plug to the wall outlet, the other end to the
AC ch
arging input port of EB70. The equipment comes with a built-in
advanced control circuit. When it is fully charged(Approx. 4-5hrs), it will
stop charging automatically.
Normal Startup
Normal Shutdown
Overload
Short Circuit
ECO Mode Start
ECO Mode Close
Low Battery
High/Low Temperature
The LCD screen turns on.
The LCD screen turns off.
'OVERLOAD' on the LCD screen flashes.
'SHORT' on the LCD screen flashes.
'ECO' displays on the LCD screen.
'ECO' disappears on the LCD screen.
The battery icon on the LCD screen flashes.
'TEMP' on the LCD screen flashes.
LCD Screen Status Explanation
AC outlet
T200S 200W Adapter
8.1 Charging with AC wall outlet
To Next Page
Loading...
