5.4 Set ECO Mode
The battery life can be extended under ECO Mode. When enabled, the battery level of
X60 will remain between 60% and 70%.
It is recommended to enable this mode if X60 is kept being charged.
5.4.1 Enable ECO Mode
When X60 is powered on, press the power button twice to enable ECO mode. The ECO
icon will be displayed at the top left of the LCD screen.
5.4.2 Disable ECO Mode
Disable ECO mode by either of the following 3 operations:
• Press the power button twice • Restart X60 • Remove the X60 charger.
When ECO mode is disabled, the ECO icon disappears from the LCD screen.
5.3 Discharging
X60 is equipped with five types of DC output ports: USB-C, USB-A, DC 12V/5A, DC 16V/4A,
and DC 24V/4A.
When X60 is on, use the matching power cable to connect your device and X60.
Note:
Only one of the three ports (DC 12V/5A, DC 16V/4A and DC 24V/4A) can be used at a time.
If you need to switch output ports:
(1) Disconnect the device currently in use on the output port.
(2) Wait for 4 seconds.
(3) Connect the device to the corresponding output port.
JUST POWER ON 15
To Next Page
Loading...
