BLUM SERVO-DRIVE

17
EN
EN
SERVO-D RIVE
Instruction leaet
The electromechanical opening support
function is only triggered by a brief touch
or pull. Leaning on the pull-out unit, for
example, will not open it.
Lean protection feature
The following parameters must be observed to ensure the error-free functioning of SERVO-DRIVE:
• Blum distance bumpers must be attached
to the front to ensure the required trigge-
ring signal (2 mm) between the pull-out
unit and the cabinet.
• No items can be clamped between the
pull-out unit and the cabinet back and/or
SERVO-DRIVE.
➢ Improper use may cause SERVO-DRIVE for pull-out systems to wear prematurely!
➢ Do not press or pull with force against the movement direction when opening or closing the
drawer.
NOTE