What to do if there is a power failure with BLUM Lifting Systems?
If the power supply is interrupted during opening or closing, the SERVO-DRIVE for AVENTOS lift system will remain in that position. You can manually close the front. When power is restored, simply touch the switch to reactivate the SERVO-DRIVE function.
What to do if the BLUM Door Opening System (SERVO-DRIVE for TANDEM / TANDEMBOX) doesn't work on any drawers?
If the BLUM transformer isn't connected, plug it in. Also, check the circuit breaker or fuse box in case of a power cut. If the transformer is defective, contact customer service to replace it.
Why is my BLUM Door Opening System (SERVO-DRIVE for AVENTOS) not opening or closing completely?
The front might not be balanced or may not lie evenly on the cabinet. In this case, contact customer service to readjust the front. Also, the battery of the SERVO-DRIVE switch might be dead or inserted incorrectly, so replace or correctly insert the battery. The SERVO-DRIVE switch or the drive unit itself could be defective, requiring replacement by customer service. Finally, defective cabling could be the cause, which your dealer's customer service can correct.
How to fix a red flashing battery display on BLUM Door Opening System SERVO-DRIVE switch?
A red flashing battery display on the SERVO-DRIVE switch indicates that the battery is losing power or has been inserted incorrectly. Replace the battery or insert it correctly.
General| Brand | BLUM |
|---|---|
| Model | SERVO-DRIVE |
| Category | Servo Drives |
| Language | English |
Explains hazard symbols and their meanings for safe operation.
Provides critical safety guidelines for operating and handling the SERVO-DRIVE system.
Highlights risks and preventative measures related to children and the SERVO-DRIVE system.
Details the SERVO-DRIVE system for AVENTOS lift systems.
Information on the battery-operated SERVO-DRIVE switch.
Information on the SERVO-DRIVE Flex system for handle-less appliances.
Details the SERVO-DRIVE system for LEGRABOX and TANDEMBOX drawers.
Technical specifications for Z10NE030 and Z10NE040 power supply units.
To Next Page
