BLUM SERVO-DRIVE - SERVO-DRIVE Power Supply Unit Technical Data

24
SERVO-D RIVE
Instruction leaet
Technical data
The appliances must only be used in dry, closed rooms. All SERVO-DRIVE drive units, the COMBOX
and the vibration sensor are of protection class III and must only be supplied with safety extra-low
voltage (SELV). They are only to be used with the power supply units provided by Blum.
Input voltage: ............................................................................................... 100–240 V AC / 50–60 Hz
Input current: ................................................................................................................................. 0.6 A
Output voltage: ..................................................................................................................... 24.0 V DC
Output current: ............................................................................................................................... 1.0 A
Output power: ............................................................................................................................. 24.0 W
Average active efficiency: ........................................................................................................... 86.8 %
Efficiency at low load (10%): ...................................................................................................... 84.0 %
No-load power consumption: ................................................................................................... ≤ 0.08 W
Ambient conditions:
Transport / Storage: ......................................................................... -30 to +70 °C / 0 to 90 % r.H.
Operation: ................................................................. 0 to +40 °C / 5 to 80 % r.H. non condensing
Maximum altitude: ................................................... 2000 m (at an ambient temperature of 25 °C)
Protection category: ................................................................. IP40 (if cable end protector is inserted)
Input voltage: ............................................................................................... 100–240 V AC / 50–60 Hz
Input current: ................................................................................................................................. 2.5 A
Output voltage: ..................................................................................................................... 24.0 V DC
Output current: ............................................................................................................................... 3.0 A
Output power: ............................................................................................................................. 72.0 W
Average active efficiency: ........................................................................................................ ≥ 88.0 %
Efficiency at low load (10%): ................................................................................................... ≥ 80.0 %
No-load power consumption: ................................................................................................... ≤ 0.15 W
Ambient conditions:
Transport / Storage: ......................................................................... -30 to +70 °C / 0 to 90 % r.H.
Operation: ................................................................. 0 to +40 °C / 5 to 80 % r.H. non condensing
Maximum altitude: ................................................... 4000 m (at an ambient temperature of 25 °C)
Protection category: ................................................................. IP40 (if cable end protector is inserted)
SERVO-DRIVE power supply unit Z10NE030
SERVO-DRIVE power supply unit Z10NE040