BLUM SERVO-DRIVE User Manual

1
2
1
2
1
2
3
4
12
A
A
SERVO-D RIVE
Instruction leaet
Battery display (LED)
Connect (LED)
SERVO-DRIVE switch
The SERVO-DRIVE switch is battery-operated (CR2032).
Only use batteries from reputable manufacturers.
1
2
Replacing the battery
When the battery power begins to weaken, the battery display (LED) will begin to flash red.
Open the SERVO-DRIVE switch and
remove the battery holder
Remove the battery
Insert new battery (type CR2032),
observing the correct pole connections
Close battery holder
The SERVO-DRIVE switch battery must not be recharged or discarded into fire.
If the battery is inserted incorrectly, the SERVO-DRIVE switch battery display will lights up red.
NOTE
1
2
3
4

BLUM SERVO-DRIVE Specifications

General

Brand	BLUM
Model	SERVO-DRIVE
Category	Servo Drives
Language	English