13
EN
EN
SERVO-D RIVE
Instruction leaet
Power failure
If the power supply is interrupted during the opening or closing process, the SERVO-DRIVE for
AVENTOS lift system will remain in that position. The front can be closed manually, or when power is
restored; simply touch the switch to re-activate SERVO-DRIVE function.
The following parameters must be observed to ensure the error-free functioning of SERVO-DRIVE for
AVENTOS:
• Blum distance bumpers must be attached to the front to maintain the required distance between the
lift system and the cabinet.
• No items should be placed between the front and the cabinet.
➢ Improper use may cause SERVO-DRIVE for AVENTOS to wear prematurely!
➢ Do not press or pull with force against the movement direction when opening or closing the lift
system.
➢ Never remove the front. Front removal may only be carried out by qualified personnel. See also
the safety section at the first pages of this leaflet.
NOTE
To Next Page
Loading...
Need help?
General
