5
EN
EN
SERVO-D RIVE
Instruction leaet
Structural changes and spare parts
Structural changes and spare parts not approved by the manufacturer
have an adverse effect on the safety and functionality of
SERVO-DRIVE and therefore are not allowed.
• Only use original spare parts from Julius Blum GmbH
• SERVO-DRIVE components are the only devices that should be
connected to the SERVO-DRIVE power supply unit.
• Only qualified specialists may install or replace
SERVO-DRIVE components, modify the position of the
SERVO-DRIVE power supply unit or modify the cabling.
• Please make sure that the Blum distance bumper is attached
to the front.
To ensure that lift systems, drawers, refrigerators or freezers and
dishwashers cannot be activated unintentionally, we recommend
connecting the SERVO-DRIVE power supply unit to a switched outlet.
For more information, please consult an electronics retailer.
NOTE
To Next Page
Loading...
Need help?
General
