03
contact support@blustream.co.uk / support@blustream.com.au
Our EX40B-KIT HDMI™ extender set oers HDMI distribution over a single
CAT cable. The product delivers HDMI & B-directional IR up to lengths of
40m @ 1080p and 50m @ 1080i.
Introduction
FEATURES:
• Extends HDMI 1080p up to distances of 40m over single CAT
cable
• Extends HDMI 1080i and lower resolutions up to distances
of 50m over single CAT cable
• Supports industry standard video resolutions 480i-1080p
and DVI formats up to 1920x1080
• Supports 3D signal extension
• Supports LPCM 7.1ch, Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio transmission (*Note - Audio type must
be forced by source hardware as in-built EDID management
is limited to 2ch)
• Supports bi-directional IR from input and output locations
• Smart EDID management
• Supplied with Blustream IR receiver and emitter
• Requires local power at both Transmitter and Receiver
• HDCP compliant
WARNING!
Please read these instructions carefully before connecting, operating or adjusting this product. Incorrect termination of the RJ45
connecting cable may result in damage to the Blustream hardware.
To Next Page
Loading...
Need help?
General
