14EN
II. Temperature setting
Quick start
REMARKS: under window function, pilot control is not available.
1. Under the mode of comfort or Eco (excluding anti-freezing mode), temperature is
adjustable. Press / to choose the desired temperature for comfort mode between
5°C and 29°C. The temperature difference between mode ECO and mode comfort is
3.5°C, so the temperature range of mode ECO is between 1.5°C and 25.5°C.
2. Press other buttons except / to finish the setting, or it will automatically save.
3. When the room temperature is higher than the selected temperature, the heater
will stop heating.
III. Setting menu (MENU button)
Press MENU to enter setting menu interface.
Press / or / to choose from time setting , program mode setting ,
motion sensor . The selected icon will flash while other icons keep on.
Press MENU to exit the setting menu or after 30 seconds it will automatically exit and
go back to working interface.
1. Time setting
Press MENU to enter setting interface, and / to choose time setting . When
is flashing, press OK to start time setting.
Press / to toggle among day of week, hour, and minute, and / to set day of
week, hour, and minute.
Press OK to confirm hour setting and move to minute setting 00-59.
To Next Page
Loading...
