15EN
Day of week Pre-set 24-hour
program P1-P7
Quick start
Press OK to confirm minute setting and move to day of week setting1-7.
Press OK to confirm or after 30 seconds, it will automatically save and go back to
working interface.
2. Program mode setting
Press MENU to enter setting interface, and / to choose program mode setting .
When is flashing, press OK to enter setting interface.
Under program mode, you can choose from 7 pre-set 24-hour programs (P1-P7) for
each day of week. The 7 pre-set 24-hour programs (P1-P7) are programable. For
each hour, you can choose between comfort mode and economic mode.
Under program mode, the default setting for day 1 to 7 of the week are as follows:
day 1 to day 5: work with P1,
day 6 to day 7: work with P3.
The default setting of P1-P7 are as follows:
Press / to choose day of week, and / to choose from 7 pre-set 24-hour
programs (P1-P7), Or press OK to confirm previous setting and enter setting for next
day. After setting of last day, press OK to confirm or after 30 seconds, it will
automatically save and go back to working interface.
P1
P2
P3
P4
P5
P6
P7
To Next Page
Loading...
