BPAP Series User Manual V1.0
36 / 58
Turn the Knob to choose between the two
time formats.
Setting screen brightness by adjusting this option.
The backlight of the LCD screen can be set to ―Auto‖
or ―On.‖ Turn the Knob to choose between
the two modes. If it is set to ―Auto,‖ the backlight
will turn off automatically after 30 seconds of
inactivity. If it is set to ―On,‖ the backlight will always
be on.
Full Face;
Nasal; Pillow;
Other
There are three mask types available, Full Face
(full-face mask), Nasal (nasal mask), and Pillow
(nasal pillow mask). When selecting masks other
than the above three types of BMC masks, the
patient can identify the masks as other.
Start the
Mask Fititing
Test
Test whether the mask is worn correctly,the screen
will display the "great" icon if it is qualified,
otherwise the screen will display the "need to adjust"
icon.
iCode,
iCode QR,
iCode QR +
iCode provides access to the patient's compliance
data during a recent time period. The iCode mode
displays data in sequences of numbers, and the
iCode QR / iCode QR + mode displays data in
two-dimensional codes
Connect to WiFi network by adjusting this option
Use Time displays how long has the device been
used by the patient. The use time can be erased
Reset the use time of the filter, tubing and mask
30 days/60
days/180
days/1
year/off
This function is used for setting filter reminder, tube
reminder and mask reminder. After opening, can set
the use time of filter, tube and mask.
English/
Español/
Português/
Deutsch/
中文（简体）
/Français/
Polski/
Italiana/Türk/
Русский/
Nederlands/
Ελληνικά/
한국어
Turn the Knob to choose among the two
languages available. The setting is only valid when
the device is inserted a SD card with language pack.
Displays related information of the device (Model,
SN, Version, ID). This is read-only and cannot be
edited.
To Next Page
Loading...
Need help?
General
