Auto CPAP / CPAP System User Manual V1.0
19 / 51
CAUTION!
• Observe the water level of the water chamber before using the humidifier. Make sure there
is sufficient water in the water chamber, and avoid heating the device with an empty water
chamber.
12.5 Using the Ramp Feature
Every time the feature is enabled, the pressure will drop to the initial pressure, and then
gradually rise to the prescribed treatment pressure according to the preset ramp time, so as
to make the patient fall asleep easily. The screen displays a real-time countdown of the
remaining ramp time in minutes.
CAUTIONS!
• You can use the ramp feature as often as you wish during sleep.
• The ramp feature is not prescribed for all users.
12.6 Accessing the iCode
After the device is powered on, move the cursor to the icon by turning the Knob ,
as shown in the Fig. 12-1. Access the iCode information by pressing the Knob , the
screen displays the iCode Inerface, as shown in the Fig. 12-2.
Fig. 12-1
Fig. 12-2
To Next Page
Loading...
Need help?
General
