BMC G3 C20 User Manual

Auto CPAP / CPAP System User Manual V1.0
30 / 51
Fig. 15-12
Fig. 15-13
To switch from one successfully connected WiFi network to another, select the desired new
network and enter the correct password to connect to it.
If the desired WiFi network is a public network that does not require a password, turn the
Knob directly
after accessing the password input interface
until the cursor stays on the
Confirmation Key
. Press the Knob to connect to the network.
16. Navigating the Patient Menu
16.1 Steps to Navigating the Patient Menu
16.1.1 Accessing the Main Interface
Connect the power cord and power adapter properly. The screen displays the Main Interface
shown in Fig. 16-1.
Fig. 16-1
Note: The above interface only applicable to the device does not activate the SmartC or
SmartA. If the SmartC or SmartA is enabled, and the symbol will appear in the status

BMC G3 C20 Specifications

General

Brand	BMC
Model	G3 C20
Category	Medical Equipment
Language	English