M1 Mini User Manual
15 / 32
11.9 Starting Treatment
Press the Start/Stop Button or click on the icon in the LightTrip App, the device
will start delivering air.
WARNINGS!
• Be sure to follow your physician’s instructions on adjusting the settings. To order any
accessories not included with the device, contact your equipment supplier.
• DO NOT connect any ancillary equipment to the device unless recommended by BMC or your
physician. If you suffer from chest discomfort, shortness of breath, stomach bloating, or severe
headache when using the device, contract your physician or qualified medical personnel
immediately.
12. Routine Use
12.1 Connecting the Tubing
Connect the power adapter and tubing properly according to the instructions in the First Time
Setup (Chapter 11). Connect the mask and headgear according to the user manual for the
mask.
CAUTION!
• Before each use, examine the tubing for any damage or debris. If necessary, clean the tube
to remove the debris. Replace any damaged tube. Make sure that the mask does not leak.
12.2 Adjusting the Tubing
Lie down on your bed, and adjust the tubing so it is free to move if you turn during sleep.
Adjust the mask and headgear until you have a comfortable fit and until there are no airflow
leaks around the mask.
12.3 Turning on the Airflow
Press the Start / Stop Button or click on the icon in the LightTrip App to turn on
the airflow. The LightTrip App will display treatment pressure and other information.
12.4 Using the Ramp Function
When the Ramp function is turned on, the pressure will gradually rise to the prescribed
treatment pressure according to the preset ramp time from the initial pressure, so as to make
the patient fall asleep easily. The LightTrip App displays a real-time countdown of the
remaining ramp time in minutes.
CAUTION!
• The ramp feature is not prescribed for all users.
To Next Page
Loading...
Need help?
General
