V CONNECTION
Triangle230 V THREE-PHASE
Triangle230 V THREE-PHASE
User's Manual EASY_01
Automation Control WINDOW DOOR
The equipment controls, via inverters, all industrial locks equipped with MOTORS THREE-PHASE
ELECTRIC MOTORS.
Acceleration, deceleration ramps, electric brake and working times are controlled; all parameters
can be set via display interface or by self-learning.
The board provides operation with limit switches (FCA and FCC) and encoders. Slowing down
opening and closing and photocell exclusion is done by counting the working time and/or
revolutions of the
rotating.
The board via microcontroller controls the working current of the motor and the temperature of
the heatsink of the schedad4, providing for signaling and handling of any malfunctions.
All inputs are signaled via LEDs
Alarm signals are indicated by the flashing LAMP_RGB and LED on cover
The control board is powered at 230Vac
Accessories: 12Vdc/500mA MAX output.
The motor characteristics are given below:
Engine
1. Inputs-Outputs
The equipment has 230Vac-50Hz power supply input.
Low-voltage isolated inputs for control and safety accessories
Output for accessory power supply 12Vdc/500mA max.
Connection with ESP_OUT board
connection with LAMP_RGB board
Connection with UPS
Output for three-phase motor power supply 230Vac
Output for 105Vdc electrobrake power supply
Output for flashing power supply clean contact/40W MAX
1
To Next Page
Need help?
General
