EasyManua.ls Logo

BMT 932 - The Menu Set Parameters

BMT 932
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OZONE MONITOR BMT 932 Manual, Rev. 02/2021
22
Unit Ozone Alarms RS-232
Gas
Parameters
Time/Date Other Param.
See next
Page
Time Date
Norm.
Temperature
Norm.
Pressure
Baudrate Timed/Polled Time Interval
High Alarms Low Alarms
Enable/
Disable
Threshold Latching
Enable/
Disable
Threshold Latching
Menu View ParametersSCROLL
ENTER
BACK
EMO Settings
Select
Channel *
Select
Channel *
*: Select Channel by pressing SCROLL, then ENTER
The following parameters are shown:
Unit Ozone
Unit of ozone concentration (ppmv or µg/m³)
Alarms
Activation, thresholds, and latching for each channel or all channels ot once, assigment of
the available alarms to the three EMO groups, closing or opening of Alarm Relays
RS-232
Baud rate, periodic transmission or polling, time interval of periodic transmission
Gas Parameters
normalizing temperature and pressure
Time / Date
The meaning of these parameters is explained in greater detail on the following pages. An addi-
tional point in the menu View Parameters is Other Parameters:
Operating
Hours
Active Channels
Alarm Beep
On/Off
Range Sniffer On/Off Serial No.
Menu View Other Parameters
Other Param.
ENTER
SCROLL
BACK

Table of Contents