BMW i wallbox Installation Instructions

40
Electrical data
Charging cable: Type 2 cable: up to 32 A/400 VAC
to EN 62196-1 and EN 62196-2
Protection class: I
Device's IP protection class: IP54
Protection against mechanical impacts: IK08
Mechanical data
Dimensions (W x H x D): 399 x 652 x 202 mm (without plug)
Weight: approx. 10 kg (depending on version)
Ambient conditions
Operating temperature range at 16 A: -25 °C to +50 °C
No direct sunshine
Operating temperature range at 32 A: -25 °C to +40 °C
No direct sunshine
Temperature properties: This is not a safety device, it is just an operating
function. The specified operating temperature
range must not be exceeded.
The device supplies the charging current
continuously at the specified operating
temperature ranges.
In order to increase the charging availability,
the charging current level is reduced to 16 A
if the temperature is exceeded. The charging
cycle may subsequently also be shut down. The
charging cycle is continued, and the charging
current value is increased again after cooling.

BMW i wallbox Specifications

General

Connector Type	Type 2
Protection Rating	IP54
Communication Protocol	OCPP 1.6
Voltage	230 V / 400 V, 1/3-phase
Connectivity	Wi-Fi, Ethernet
Compatibility	All electric and plug-in hybrid vehicles with Type 2 connector