BMW iDrive 6.0 - Page 13

Selecting a destination
from the contacts
1. "Navigation"
2. "Enter new destination"
3. "Contacts"
Contacts with addresses are displayed if
these have been checked as destinations
from among the Contacts. Check the address
as a destination, refer to page 78.
4. Select a contact.
5. Select the address.
6. "Start guidance"
Destination entry using
GPS coordinates
Concept
Destinations can be entered directly using GPS
coordinates.
General information
Enter the coordinates in degrees, minutes and
seconds or as decimal values.
Open
1.
"Navigation"
2. "Enter new destination"
3. "GPS coordinates"
4. "Format"
▷ "Degrees Minutes Seconds"
▷ "Decimal"
5. "Longitude" or "Latitude"
6. Turn the Controller until the desired degree
indication and point of the compass are dis‐
played.
7. Press the Controller.
8. Enter the values for minutes and seconds
and point of compass, if needed.
9. "Accept destination"
Destination entry via
Concierge service
General information
Concierge service provides information, for in‐
stance about hotels and restaurants. Addresses
can be transmitted directly to the navigation sys‐
tem.
Calling up the Concierge service
1.
"Navigation"
2. "Enter new destination"
3. "Concierge"
A voice connection to the Concierge service
is established.
Seite 13
Destination input
NAVIGATION
13
Online Edition for Part no. 01402989211 - II/18