Installation position
The snap-in adapter is located in the front of the
center armrest. The direction of installation in the
center armrest varies according to the vehicle.
Inserting the snap-in adapter
1. Press button and remove the cover.
2. Insert the snap-in adapter at the front, ar‐
row 1, and press down, arrow 2, until it en‐
gages.
Inserting the mobile phone
1.
Depending on the mobile phone, remove the
protective cover from the antenna connector
and from the USB connection of the mobile
phone.
2. Slide the mobile phone with the buttons fac‐
ing up in the direction of the electrical con‐
nections, arrow 1, and push downward, ar‐
row 2, until it engages.
Removing the mobile phone
Depending on the mobile phone, press or slide
the button and remove the mobile phone. De‐
pending on the mobile phone, reinstall the pro‐
tective cover on the mobile phone's antenna
plug and USB connector.
Removing the snap-in adapter
Press button in front of the snap-in adapter. Re‐
move the adapter and, if needed, reattach the
cover.
Wireless charging tray
Concept
The wireless charging tray enables the following
functions to be performed without cables:
▷ Charging the rechargeable battery of a mo‐
bile phone with Qi capability and of other mo‐
bile devices, which support the Qi standard.
Seite 85
Telephone
COMMUNICATION
85
Online Edition for Part no. 01402989211 - II/18
To Next Page
Loading...
