Displays
1. "Communication"
2. "Recent calls"
3. The 20 last calls are displayed.
Filtering call list
1. "Calls:"
2. Select the desired setting.
Selecting number from list
Select from list. Call is established via the mobile
phone, from where the entry originates.
Via options: start call via the second mobile
phone.
To cancel: "End call"
Storing as contact or adding to
contact
1.
Highlight the telephone number.
2.
Press button.
3. "Save as new contact" or "Add to contact"
Active calls
Adjusting the volume
Turn the volume button on the radio during the
call, until the desired volume is reached. The set‐
ting is stored for the driver profile currently used.
Automatic volume equalization
1.
"My Vehicle"
2. "iDrive settings"
3. "Tone"
4. "Volume settings"
5. "Microphone" or "Speakers"
6. To adjust: turn the Controller.
7. To store: press the Controller.
Dialing a number
1. "Communication"
2. "Dial number"
3. Enter the numbers.
4. Select the symbol.
The connection is established via the mobile
phone to which this function has been as‐
signed.
Establish the connection via the additional
phone:
1.
Press button.
2. "Call via"
Holding, resuming
An active call can be put on hold and resumed
later on.
▷ "Hold/Resume"
Call is put on hold.
▷ "Hold/Resume"
Call is resumed.
Muting the microphone
When a call is active, the microphone can be
muted.
"Microphone"
The muted microphone is automatically acti‐
vated:
▷ When a new connection is established.
▷ When switching between call parties.
DTMF suffix dialing
DTMF suffix dialing can be used for gaining ac‐
cess to network services or for controlling devi‐
ces, for instance to make a remote inquiry of an
answering machine. The DTMF code is needed
for this purpose.
1.
"Keypad dialing"
2. Enter DTMF code.
Seite 75
Telephone
COMMUNICATION
75
Online Edition for Part no. 01402989211 - II/18
To Next Page
Loading...
