"INDIVIDUAL": the Intelligent Safety Systems are
switched on according to the individual settings.
Some Intelligent Safety Systems cannot be
switched off individually.
Press and hold the button.
All Intelligent Safety Systems are
switched off.
Button Status
Button illuminates green: all Intelligent
Safety Systems are switched on.
Button illuminates orange: some Intel‐
ligent Safety Systems are switched
off.
Button does not illuminate: all Intelli‐
gent Safety Systems are switched off.
Setting the warning time
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Lane change warning"
5. Select the desired setting.
"Off": no warning is output for this setting.
The setting is saved for the currently used driver
profile.
To adjust the strength of the
steering wheel vibration
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Steering wheel vibration"
4. Select the desired setting.
The setting is accepted for all Intelligent Safety
Systems, and saved for the currently used driver
profile.
Vehicles with side collision warning:
steering intervention on/off
Steering intervention can be separately switched
on and off for Lane Change Warning or Lane De‐
parture Warning.
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Steering intervention"
The setting is saved for the currently used driver
profile.
Warning function
Light in the exterior mirror
Advance warning
The dimmed light in the exterior mirror indicates
when vehicles are in the blind spot or are ap‐
proaching from the rear.
Acute warning
If the turn indicator is switched on while a vehicle
is in the critical area, the steering wheel vibrates
briefly and the light in the exterior mirror flashes
brightly.
The warning is terminated when the turn signal is
cancelled or the other vehicle has left the critical
area.
Seite 195
Safety
CONTROLS
195
Online Edition for Part no. 01402989787 - II/18
To Next Page
Loading...
