▷
▷
A message appears in the instrument cluster.
This message is operated by pressing the button
again.
Display in the instrument cluster
Symbol Description
Symbols illuminate:
M Dynamic Mode is activated.
DSC indicator lamp also flashes:
M Dynamic Mode is regulating
the driving and braking forces.
The indicator lamps illuminate:
M Dynamic Mode or DSC has
failed.
M xDrive
Principle
M xDrive is the vehicle's four-wheel drive system.
The combination of M xDrive and Dynamic Sta‐
bility Control DSC further optimises traction and
driving dynamics. M xDrive distributes the drive
forces variably to the front and rear axles accord‐
ing to the driving situation and road surface con‐
ditions.
General
3 M xDrive programs are available when DSC
Dynamic Stability Control is deactivated.
Programs
Pro‐
gramme
Distribution of drive forces
"4WD" Front and rear axle.
"4WD Sport" Front and rear axle.
Main component, rear axle.
"2WD" Rear axle.
A programme is active automatically in the
following situations:
▷ When the drive-ready state is switched on:
"4WD".
▷ When MDM is active: "4WD Sport".
▷ When DSC is active: "4WD".
Selecting a channel
It is possible to configure the required pro‐
gramme for Setup M1 or M2.
Via iDrive:
1.
"My Vehicle"
2. "Setup"
3. "Configure M1" or "Configure M2"
4. Deactivate DSC accordingly.
5. "M xDrive"
6. Select the desired channel.
Setting is accepted immediately if M Setup is
active and DSC is deactivated.
To activate the required M Setup with the selec‐
ted settings, press the corresponding button on
the steering wheel:
▷
▷
Seite 212
CONTROLS
Driving Stability Control Systems
212
Online Edition for Part no. 01402989787 - II/18
To Next Page
Loading...
