BMW M5 - Page 247

Ultrasonic sensors measure parking spaces on
both sides of the vehicle.
M Steptronic sport transmission
The Park Assistant calculates the ideal parking
line and takes over the following functions during
a parking process:
▷ Steering.
▷ Accelerating and braking.
▷ Changing gear.
Press and hold the Park Assistant button for the
duration of the parking process. The parking
process takes place automatically.
Safety notes
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the traffic situa‐
tion correctly. Due to system limitations, it can‐
not respond independently and appropriately in
all traffic conditions. There is a danger of acci‐
dents. Adapt your driving style to the traffic
conditions. Observe the traffic situation and in‐
tervene actively if the situation warrants it.
WARNING
When the trailer tow hitch is used, the Park As‐
sistant could cause damage if its sensors are
obstructed. There is a danger of accidents or
damage to property. Do not use the Park Assis‐
tant when towing a trailer or using the trailer
tow hitch, for example with a bicycle carrier.
NOTE
The Park Assistant may steer across kerb or up
onto kerbs. There is a danger of damage to
property. Observe the traffic situation and inter‐
vene actively if the situation warrants it.
In addition, the safety notes for Park Distance
Control PDC, see page 232, apply.
Overview
Button in the vehicle
Park Assistant button
Ultrasonic sensors
The system uses the four side ultrasonic sen‐
sors, arrows, and the ultrasonic sensors of Park
Distance Control PDC in the bumpers to meas‐
ure parking spaces and distances to obstacles.
Operating requirements
Ultrasonic sensors
To ensure full functional capability:
▷ Do not cover the sensors, for example with
stickers.
▷ Keep the sensors clean and unobstructed.
Seite 247
Driver Assistance Systems
CONTROLS
247
Online Edition for Part no. 01402989787 - II/18