5. Position the scent cartridge so the chip
points away from the cartridge bracket.
6. Insert the scent cartridge into the cartridge
bracket without forcing it. The cartridge can
be felt to engage slightly when inserted.
7. To close, push in the cartridge holder until it
engages.
Make sure that no objects press against the
cartridge holder from the side, otherwise the
function of the system could be impaired.
8. Close the glove box.
Removing scent cartridges (right-
hand drive vehicle)
The scent cartridges are located in the glove box.
1.
Open glove box, see page 277.
2. Press on the cartridge holder.
The cartridge holder slides out.
3. Pull the required scent cartridge out of the
bracket.
Scent cartridge 1: first scent displayed on the
Control Display.
Scent cartridge 2: second scent displayed on
the Control Display.
4. Pull the scent cartridge to be removed out of
the holder.
Recycling
Empty scent cartridges can be handed
over for recycling at a Service Partner of
the manufacturer or another qualified
Service Partner or a specialist workshop.
Seite 269
Air conditioning
CONTROLS
269
Online Edition for Part no. 01402989787 - II/18