Interruption or reversal of the
swivel movement
General
The swivel movement is interrupted, might be
reversed or is not performed if the current limit
values are exceeded, for example at very low
temperatures or if mechanical resistance is en‐
countered. LED in button illuminates red.
Repeat the swivel movement with
the engine running
1.
Switch on drive-ready state via the start/stop
button.
2.
Press the button in the boot and hold it
until the ball linkage has moved completely in
or out.
If necessary, repeat the swivel movement with
the button pressed and the engine running.
The LED in the button illuminates green when
the ball linkage has reached an end position.
If this reoccurs, contact a Service Partner of the
manufacturer or another qualified Service Partner
or a specialist workshop.
Trailer socket
The trailer socket is located on the trailer tow
hitch.
Fold the cover downwards.
Eye for securing cable
There is an eye on the trailer tow hitch for fasten‐
ing the trailer securing cable.
For increased safety when towing a trailer during
a journey, attach the trailer securing cable to the
eye.
Check that the securing cable can move freely
and is not dragging on the ground.
Seite 299
Towing a trailer
DRIVING HINTS
299
Online Edition for Part no. 01402989787 - II/18
To Next Page
Loading...
