the following oil specification can be used for
topping up:
Oil specification
ACEA A3/B4.
ACEA C2.
ACEA C3.
Viscosity classes
When selecting an engine oil, make sure that the
engine oil belongs to one of the following viscos‐
ity classes:
Viscosity classes
SAE 0W-30.
SAE 5W-30.
SAE 0W-40.
SAE 5W-40.
Information on suitable oil specifications and vis‐
cosities of engine oils can be obtained from a
Service Partner of the manufacturer or another
qualified Service Partner or a specialist work‐
shop.
Oil change
NOTE
Engine oil not replaced in time can lead to in‐
creased engine wear and thus engine damage.
There is a danger of damage to property. Do
not exceed the service date indicated in the ve‐
hicle.
The manufacturer of the vehicle recommends
having the engine oil changed by a Service Part‐
ner of the manufacturer or another qualified
Service Partner or a specialist workshop.
Seite 335
Engine oil
MOBILITY
335
Online Edition for Part no. 01402989787 - II/18
To Next Page
Loading...
