Need help?Do you have a question about the BMW N62 Series and is the answer not in the manual?
General| Configuration | V8 |
|---|---|
| Fuel type | Petrol |
| Valvetrain | DOHC 4 valves per cylinder |
| Torque Output | 340–490 N⋅m (4.4L), 475-490 Nm (4.8L) |
| Compression Ratio | 10.0:1 (4.4L), 10.5:1 (4.8L) |
| Engine Block Material | Aluminum |
| Cylinder Head Material | Aluminum |
| Cooling system | Water-cooled |
| Redline | 6, 500 rpm |
Overview of the N62 engine's development goals and key features.
Detailed technical specifications for N62B36 and N62B44 engines.
Graphical representation of output and torque curves for N62 engines.
Visual identification of components on the N62 engine.
Details on the N62 crankcase venting system, referencing other manuals.
Information on the N62 alternator, referencing other manuals.
Details on the N62 thermostat, referencing other manuals.
Information on N62 engine management, referencing other manuals.
Information on N62 VANOS, referencing other manuals.
Details on the N62 Valvetronic system, referencing other manuals.
Description of the fresh air intake system and its components.
Details on the N62 engine's exhaust system structure and components.
Overview of engine ancillary components and the belt drive system.
General information about the N62 cylinder heads, their material, and construction.
Explanation of the N62 engine's valve gear components, including cylinder heads and timing chain guides.
General information on the N62 Valvetronic system, its benefits, and function.
Explanation of the N62's variable camshaft adjustment system and VANOS units.
Overview of the N62 engine's coolant circuit and its components.
Description and function of the N62 engine's water pump and its integrated thermostat.
Overview of the N62 engine's lubrication system and oil circuit.
Description of the N62 engine's two-level gear oil pump and its function.
Technical data for oil capacity, oil pressure, and oil delivery rate for the N62 engine.
Introduction to the ME 9.2 engine management system for the N62 engine.
Block diagram overview of the ME 9.2 engine management system, section 1.
List of all components within the ME 9.2 engine controls for the N62 engine.
General functional description of the ME 9.2 system, including diagnostics and cruise control.
Explanation of the N62 engine's four oxygen sensors and their regulation function.
Description of the N62 oil condition sensor, its function, and location.
General information on the N62 Valvetronic system, its benefits, and function.
Overview of N62 fuel system components modified from the E38M62.
Description of the N62 injection valves, their positioning, and spray atomization.
Details on the N62 fuel pressure regulator integrated into the fuel filter.
Description of the N62's two-part in-tank electric fuel pump.
Explanation of the N62 EKP regulation and its benefits for system performance.
Overview diagram of the E65/US design fuel system.
Requirements and measures for filling the N62 fuel tank to prevent vapour escape and foaming.
Description of the N62 tank ventilation system and its components for smooth operation.
Structure and operation of the N62 internal tank fuel circuit.
Function and procedure of the fuel tank leak diagnostic module for detecting leaks.
Three-stage diagnostic procedure for fuel tank leak detection.
List of abbreviations used in the N62 engine manual with their explanations.
To Next Page
