BMW X1 - Page 149

ing the high-beam headlights. The high beams
can be switched on and off manually at any
time.
High-beam headlights, turning
headlight flasher on/off
To turn on the high-beam headlights, push
the indicator/high-beam stalk forward, arrow
1. The high beams illuminate when the low
beams are switched on.
To turn off the high-beam headlights or op-
erate the headlight flasher, pull the indica-
tor/high-beam stalk backward, arrow 2.
The blue indicator light on the instru-
ment cluster illuminates when the high-
beam headlights are turned on or the
headlight flasher is activated.
Automatic High Beam
Assistant
Principle
The Automatic High Beam Assistant promptly
detects other road users as well as the ambi-
ent lighting, e.g., in towns, and automatically
switches the high-beam headlights on or off
depending on the traffic situation.
You may need to activate the Automatic High
Beam Assistant via iDrive before it can be
used. You can use the indicator/high-beam
stalk to temporarily deactivate or activate the
Automatic High Beam Assistant, e.g., after
turning your high beams on/off manually.
General information
In the low speed range, the high-beam head-
lights are not switched on by the Automatic
High Beam Assistant.
Functional requirements
The following functional requirements apply to
the Automatic High Beam Assistant:
▷ The automatic lights function is activated.
▷ The low-beam headlights are turned on.
Activating Automatic High Beam
Assistant
The Automatic High Beam Assistant can be
activated via iDrive:
1.
Go through the menu as follows via iDrive:
Apps menu / "Vehicle" / "Exterior lighting" /
"Headlights".
2. Tap the Automatic High Beam Assistant
button.
The headlights are automatically changed be-
tween low beams and high beams.
The green indicator light on the instru-
ment cluster illuminates when the low-
beam headlights are turned on.
The blue indicator light in the instru-
ment cluster illuminates when the sys-
tem switches on the high beams.
If the Automatic High Beam Assistant is on
and you continue driving after an interruption,
the Automatic High Beam Assistant will re-
main on.
The Automatic High Beam Assistant is deac-
tivated when the high-beam headlights are
switched on and off manually.
Seite 149
Light and view
CONTROLS
149
Online Edition for Part no. 01405A8A536 - VI/23