Turning off low beams
Depending on national-market version, the
low-beam headlights can be turned off as fol-
lows at low speeds:
▷ Press the OFF button on the light
switch.
▷ On the light switch, press and hold
the button for automatic headlights and
low-beam headlights.
▷ Turn off the light via iDrive.
Parking lights
General information
The parking lights can only be switched on in
the low speed range.
Turning on parking lights
1.
Go through the menu as follows via iDrive:
Apps menu / "Vehicle" / "Exterior lighting" /
"Roadside parking lights".
2. Tap the parking lights button.
The green indicator light on the instru-
ment cluster illuminates.
The vehicle is illuminated on all sides.
Do not use the parking lights for extended pe-
riods; otherwise, they might drain the vehicle
battery and it would then be impossible to
switch on drive-ready state.
Turning off parking lights
The following options are available to turn off
the parking lights:
▷
Press the OFF button on the light
switch.
▷ On the light switch, press and hold
the button for automatic headlights and
low-beam headlights.
▷ Turn off the light via iDrive.
▷ Switch on drive-ready state.
After the drive-ready state is switched on,
the automatic headlight control will be acti-
vated.
Roadside parking lights
When the vehicle is parked, a one-sided road-
side parking light can be switched on.
1.
Go through the menu as follows via iDrive:
Apps menu / "Vehicle" / "Exterior lighting" /
"Roadside parking lights".
2. Tap the roadside parking light button for
the desired side of the vehicle.
Welcome lights
Principle
The welcome light turns on automatically for
a limited period of time when approaching or
unlocking the vehicle.
Depending on the equipment, the exterior
lighting of the vehicle can be set individually.
Seite 153
Light and view
CONTROLS
153
Online Edition for Part no. 01405A8A536 - VI/23