BMW X1 - Page 25

The wiper lever returns to position 0 when
released.
Activating/deactivating rain sensor
To activate the rain sensor: Push the wiper
lever upward from position 0, arrow 1, once.
To deactivate the rain sensor: Push the wiper
lever back to position 0.
Adjusting the rain sensor sensitivity
To adjust the sensitivity of the rain sensor, turn
the knurled wheel on the wiper lever.
Cleaning the windshield
To clean the windshield, pull the wiper lever
back.
Rear wiper
Switching on the rear wiper
To turn on the rear wiper, rotate the outer
switch on the wiper lever upward.
Switch posi-
tion
Function
Position 0. Rest position of the wiper.
Position 1. Intermittent operation.
When reverse gear is en-
gaged, the system switches
to continuous operation.
Clean the rear window
To clean the rear window, turn the outer switch
on the wiper lever as follows:
Seite 25
On the road
QUICK REFERENCE
25
Online Edition for Part no. 01405A8A536 - VI/23