BMW X1 - Page 289

Folding back the backrest
1. Fold the rear seat backrest rearward. The
rear seat backrest first engages in the load-
ing position.
2. Pull the loop on the side of the seat.
3. Return the rear seat backrest to the upright
seat position and engage it.
Cargo cover
Safety information
Warning
Devices connected to the vehicle via a cable
such as mobile phones or loose objects can
be thrown through the vehicle interior while
driving such as in the event of an accident,
braking or evasive maneuver. There is a risk
of injury and risk of damage to property. Se-
cure loose objects or devices that are con-
nected to the vehicle via a cable.
Warning
An incorrectly inserted cargo cover can be
thrown about the car's interior such as in the
event of an accident or a braking or evasive
maneuver. There is a risk of injury and risk
of damage to property. Make sure the cargo
cover is securely engaged in the brackets.
Warning
Body parts can become trapped when the
folding cargo cover is operated. There is a
risk of injury. When operating the folding
cargo cover, make sure that the travel path
of the cover is clear.
Removing the cargo cover
The cover can be removed to load bulky lug-
gage.
1.
Detach the retaining straps at the tailgate.
2. Grasp the cover with both hands on the
rear edge and lift slightly, arrow 1.
3. Firmly pull the cover backward out of the
brackets, arrow 2.
Inserting the cargo cover
Proceed in the reverse order to reinstall. Make
sure that the cargo cover is positioned cor-
rectly in the brackets and that it is engaged.
Cargo area partition net
General information
The cargo area partition net can be installed in
two different positions in the vehicle.
Seite 289
Cargo area
CONTROLS
289
Online Edition for Part no. 01405A8A536 - VI/23