BMW X1 - Page 290

With the rear seat backrest folded
down
When the rear seat backrest is folded down,
install the large cargo area partition net behind
the front seats.
1. Fold down the rear seat backrests.
To fold down the rear seat backrests, follow
the steps for enlarging the cargo area.
2. Open the front cover caps on top of the roof
frame.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recep-
tacles until they reach the stop, arrow 1, and
push them forward. Make sure that the bot-
tom hooks point to the front.
4. Attach the cargo area partition net with the
lower three hooks into the three front loops
on the folded down rear seat backrest, ar-
rows 2. You may need to lift the rear seat
backrests slightly in order to do this.
Additional information:
Enlarging the cargo area, refer to page 287.
With the rear seat backrest upright
With upright rear backrests, install the small
cargo area partition net behind the second row
of seats.
1. Remove the cargo cover.
2. Open the rear cover caps on top of the roof
frame.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recep-
tacles until they reach the stop, arrow 1, and
push them forward.
4. Use the two lower hooks to hook the cargo
area partition net into the lashing eyes in
the cargo area, arrow 2.
Seite 290
CONTROLS
Cargo area
290
Online Edition for Part no. 01405A8A536 - VI/23