EasyManua.ls Logo

BMW X1 - Page 360

BMW X1
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatic triggering
Under certain conditions, for example if the
airbags are deployed, an emergency call is au-
tomatically triggered immediately after an acci-
dent of corresponding severity. Automatic Col-
lision Notification is not affected by pressing
the SOS button.
Manual triggering
1. Tap the cover flap.
2. Press and hold the SOS button in the head-
liner until the LED near the button illumi-
nates green.
The LED is illuminated green when an
emergency call has been initiated.
If a cancel prompt appears on the control
display, the emergency call can be aborted.
If the situation allows, wait in the vehicle
until the voice connection has been estab-
lished.
The LED flashes green when a connection
to the BMW Response Center has been es-
tablished.
The BMW Response Center then makes
contact with the occupants of the vehicle
and initiates further steps to help.
Even if you are unable to respond, the
BMW Response Center can take further
steps to help you under certain circumstan-
ces.
For this purpose, data that serves to deter-
mine the necessary rescue measures, for
instance the current position of the vehicle
when it can be determined, is transmitted
to the BMW Response Center.
Even if the BMW Response Center is no
longer heard through the loudspeakers, the
BMW Response Center may still be able to
hear the occupants of the vehicle.
The BMW Response Center ends the emer-
gency call.
Malfunction
The function of the emergency call may be im-
paired.
The LED near the SOS button flashes for ap-
proximately 30 seconds. A Check Control mes-
sage is displayed.
Have the vehicle checked by an authorized
service center or another qualified service cen-
ter or repair shop.
Jump-starting
General information
If the battery is discharged, the engine can
be started using the battery of another vehicle
and two jumper cables. Only use jumper ca-
bles with fully insulated clamp handles.
Safety information
DANGER
Contact with live components can lead to an
electric shock. There is a risk of injury or dan-
ger to life. Do not touch any components that
are under voltage.
Warning
If the jumper cables are connected in the
incorrect order, spark formation may occur.
There is a risk of injury. Pay attention to the
correct order during connection.
Warning
In the case of body contact between the two
vehicles, a short circuit can occur while jump-
starting. There is a risk of injury or risk of
damage to property. Make sure that no body
contact occurs.
Seite 360
MOBILITY
Breakdown Assistance
360
Online Edition for Part no. 01405A8A536 - VI/23

Other manuals for BMW X1

Related product manuals