Vehicle Specifications
Bobcat 2200 Gasoline and Diesel Vehicle Operation & Maintenance Manual Page 49
DIMENSIONS/WEIGHT
Overall length (box bed configuration) 124.6 in. (317 cm)
Overall width 57.8 in. (147 cm)
Overall height (with cab frame) 77.6 in. (197 cm)
Wheelbase 81 in. (206 cm)
Ground clearance:
under differential
under floorboard
6.4 in. (16 cm)
11.1 in. (28 cm)
Front wheel tread 42.3 in. (107 cm)
Rear wheel tread 48.8 in. (124 cm)
Weight (with all-terrain tires) 1410 lb. (639.6 kg) 1551 lb. (703.5 kg)
Forward speed 25 mph (40 km/h)
Governed RPM 3825 3825
Turning radius (per SAE J 695) 141 in. (358 cm)
Load bed height 33 in. (84 cm)
Load bed size (box bed inside dimensions)
48.0 x 49.8 x 10.9 in.
(122 x 127 x 28 cm)
(15.3 cubic feet)
Maximum payload capacity (level surface only)
800 lb. (363 kg)
High capacity option: 1050 lb. (476 kg)
Vehicle rated capacity (payload, driver, and passenger; level surface only)
1200 lb. (544 kg)
High capacity option: 1450 lb (658 kg)
Maximum gross vehicle weight (fully loaded vehicle, including accessories)
2750 lb. (1247 kg)
High capacity option: 3012 lb. (1366 kg)
Standard seating capacity 2
LIQUID CAPACITIES
Engine crankcase with filter: SAE 10W-30, API classification SJ 1 qt.-25 oz. (1.7 L)
Engine crankcase with filter: SAE 10W-30, API classification CF 3 qt. (2.8 L)
Front differential: Bobcat Trans/Differential Fluid (P/N 6687120) 5 oz. (150 mL)
Rear differential: Bobcat Trans/Differential Fluid (P/N 6687120) 20 oz. (600 mL)
Transmission: Bobcat Trans/Differential Fluid (P/N 6687120) 20 oz. (600 mL)
Engine coolant: mixture of 55% propylene glycol and 45% water n/a 2 gal. (7.8 L)
Brake fluid: DOT 5 (silicone) brake fluid 8 oz. (240 ml)
Fuel tank: unleaded gasoline 6.5 gallons (24.6 L)
Fuel tank: diesel grade no.2 with cetane rating of 45 or higher 6.5 gallons (24.6 L)
TIRE PRESSURE
All-terrain tread and mud tires 20 - 22 psi (1.38 - 1.52 Bars)
SPECIFICATIONS
GASOLINE
VEHICLES
DIESEL
VEHICLES
To Next Page
Loading...