Recording and Button Operation
3.1. Power on/off and Standby mode
Long press the power button for 3 seconds to power on the camera,
camera will be in standby mode. Long press for 3 seconds again to power
it off.
3.2. Video Recording
When the camera is in standby mode, short press Front Recording Button
to start video recording. Recording initiates with the audio prompt
(Recording start), Status Indicator LED(Red recording indicator flashing,
default is off) and camera vibrates once.
Long press for 2 seconds to stop recording, camera vibrates twice and
status indicator LEDturns to solid green.
PS:when camera is in video recording statue, short press recording
button is to turn off/on recording indicator (flashing with red), not
to stop recording. You'll need to hold recording button for two
seconds to stop video recording.
3.3. One Button Recording
When the camera is powered off, ong press the Front Recording Button
for 3 seconds to power on the camera and start video recording
immediately.
3.4. Snapshot
Either when camera is in standby mode or video recording, short press
the snapshot button to take a photo, status indicator LEDwill flash once
with red.
3.5. Infrared (IR) Night Vision
When IR is in manual mode, short press the Fn button once to turn on/off
IR lights. IR can be changed to auto mode via camera setting txt.
3.6. Video Mute
Short press the Fn button twice (double click) to enable Video mute
function, when Mute is on, the recorded video won't have audio. When
mute is enabled, camera will beep once, when mute is disabled, camera
will beep twice.
https://wm,v.boblov.com/ I Support@boblov.com
To Next Page
Loading...
