www.boblov.com
• Part 4 Dash Camera Mode
Dash Cam Mode means the camera will start recording
auto as long as you connect the camera to the vehicle s
12Vdc power port using the 12-24V input and 5V-I A/2A
output port vehicle charger and start the engine.
If you want the camera to be a dash cam, on standby
mode, enter the menu setting to set the "Dash Camera
Mode" to "On" and save the change.
• Part 5 Features You May Concern
5.1 What is Stealth Mode?
If you enable "Stealth Mode" option in the menu setting,
the camera will make hidden recording. It has no
indicator, no sound prompt.
5.2 Camera Password
There is "Password Protection" option in the menu
setting.
If want to turn it on, you need to insert the default
password: 000000 first then select "On" option and
confirm.
If you forget the password, just email our support team
for help: support@boblov.com
After turning on the "Password Protection" option, the
procedure below need to verify the password, as shown
in diagrams I -4:
1. When connecting the camera to the computer;
2. Try to activate the "Default Setting" or "Format
SD-Card" option in the menu;
Email:support@boblov.com
17
To Next Page
Loading...
