Remove and clean the lter
Turn the dustbin around (HEPA lter on
top), hold the dustbin with both hands,
and press down on the two colored clips
on the sides of the dustbin to release
the lter cover. With the lter case open,
take the HEPA lter out and clean it us-
ing the cleaning tool, or a ow of air.
It is recommended that you change
bObi’s HEPA lter every few months de-
pending on the frequency and intensity
of cleaning.
Wash the dustbin
To wash the dustbin, eject the vacuum
motor rst by pushing the button on top
of the dustbin.
To open the dustbin, hold it with both hands and press down the two colored clips
on the sides of the dustbin to release its plastic door.
For a quick clean, use the cleaning brush to remove the remaining dirt and dust from
the dustbin.
To Next Page
Loading...
