Error Code 5 (Er 05)
Error code 5 means that bObi’s dustbin is installed improperly or the vacuum mo-
tor’s contact points are blocked or bent.
What to do:
Take out the dustbin, empty it, and clean the connector electrodes. Check that the
connector electrodes (two metal prongs on bObi) spring freely and are not stuck
or bent. If one or both of the electrodes is stuck, use a screwdriver to gently pull
the metal tab up and out to free it. Carefully reinstall the dustbin while bObi is in an
upright position, ensuring that it is fully engaged.
To Next Page
Loading...
