11. Why does bObi start even though I did not tell her to clean?
bObi may begin cleaning on her own if you put her remote into auto-resume (Finish
Fueling and Go) mode, or if she is scheduled to clean at a certain time.
First, look at the display on bObi’s remote. If the scheduled cleaning time slot does
not show a 4-digit number but that the code “FFGO,” then bObi is programmed to
start working immediately once she is nished fueling.
To reset this feature and cancel the auto-resume, press the SCH TIME button on the
remote, then press STOP.
12. When is a good time to use the wae function?
The Wae function is best for cleaning a small area with a large amount of dirt or
dust. It is a great way to target only one area that has become dirty, such as a spill
that must be swept or mopped in an otherwise clean area. It is also very eective
when mopping, to minimize streaking on tile or hardwood oors.
13. My bObi is stopping and showing an Error Number on remote’s screen, how
can I x this?
To understand bObi’s language, consult the Troubleshooting section of this manual
for the cause of the problem as well as its solution.
To Next Page
Loading...
