Place the side brush over the empty
socket on UltraVision.
Press down to ‘click’ and lock in place.
UltraVision’s First Clean
Before Starting
Remove protective pieces from
UltraVision, his bumper, and charging
station.
Install UltraVision’s Side Brush
Install UltraVision’s side brush to help him reach the corners and edges of rooms.
Parts You’ll Need: Side Brush
Important Note: The strength of side
brush’s connection can be increased by
slightly rotating the screw in the center of
the side brush socket counter-clockwise.
11
To Next Page
Loading...
