UltraVision’s First Mop
Mopping
1. Remove the dustbin. 2. Open the reservoir tab and ll it
with water. Use distilled water
in hard water areas.
4. Replace the dustbin.
Note: With the mop attachment connected,
UltraVision will not enter any NoMop zones
added to his map.
3. Align the mop attachment connectors
with the dustbin’s and press to lock
in place.
Open tha App and draw NoMop zones over carpeted areas and rugs on the map. To set up
UltraVision’s mop:
25
To Next Page
Loading...
