Bodet Karbu Link - VI - LED Lines Installation Guide

18
VI - Installation of the LED lines in the price sign
The LED lines must be installed behind a plexiglass window to protect them from the
weather.
Proceed as follows:
Fit a protective pane in front of each line.
If it is a non-reective pane, position it 2 or 3 cm from the gures.
To ensure good readability of all the gures, allowing for parallax errors: the distance
between the LED gures and outer structure of the totem must be properly calculated
to allow easier reading from the side from below :
- When the cut-out is made in the totem, make sure enough space is left around the
gures (B).
- Make sure there is su󰀩cient space between the lines (A).
The document is concerning the following products:
940 401 Karbu Link
B
B
A
Cut-out OK
Wrong cut-out