Loosen
Turn and loosen Rubber Stops (108) to take
up space and tighten cable.
15
STEP
31
Turn and loosen Rubber Stop (108)
to take up space and tighten cable.
Loosen
Selector Rod Top Bolt (101) must be
threaded a minimum of 1/2” into the
Selector Rod (23), and Jam Nut (70)
tightened securely against spring lock
washer (76) to ensure proper connection.
WARNING
!
!
NOTE 1
Check Jam Nut (70)
weekly to be sure it is
tight and locked onto
the Selector Rod (23).
To Next Page