Bofan PT502 - Set FMS Server and Tracker Port by SMS; Set Time Interval by SMS

10
PT502 will reply with an SMS “SET OK, APN: CMNET, USER: PASS : ”.
Note:
CMNET is China mobile’s APN, no username & password for it. You can ask your GSM operator for their
SIM card GPRS connection APN, username and password, if it has user name and password; you just add the
user name and password after APN and use “,” between each other, the complete command is
000000APN<APN data>, <User name>, <Password>
4.2.4 Set FMS server and tracker port by SMS
SMS Command format : <password> SVR<FMS domain>, <Port>
Example: Sending SMS command 000000SVRDEMO.LIVEGTS.COM,8502 to set the FMS domain and tracker
port number.
PT502 will reply with an SMS “SET OK, IP: DEMO.LIVEGTS.COM,8502”.
Note:
Please use your FMS complete domain name in capital in SVR command, DEMO.LIVEGTS.COM just for
example at here. PT502’s port number always is 8502.
4.2.5 Set Time Interval by SMS
It is for automatically update tracker position in FMS
SMS Command format : <password>GTI<time seconds>
SMS Example: Sending SMS command 000000GTI30 to set the time interval.
PT502 will reply with a SMS “Set GPRS Time Interval=30 OK”.
Note:
¾ If you want to save GPRS cost for SIM card in tracker
You can set the tracker using longer time interval when vehicle ignition is off. In this case, please connect
the PT502’s ACC(yellow line) to vehicle ignition wire, and send SMS command 000000GTI30,0,0,0,240 to
tracker, and then PT502 will update position to FMS very 30 seconds when vehicle ignition is ON, and
every 2 hours when vehicle ignition is OFF (30seconds x 240=7200seconds=2hours).
¾ If your vehicle often runs on the curve road, for get better route display in FMS
You can set the tracker update position at each corner, the complete command for better route and saving
GPRS cost is 000000GTI30,0,30,0,240 to tracker, you also need to connect the PT502’s ACC(yellow line)
to vehicle ignition wire, the tracker will update position to FMS once the vehicle turns bend for 30 degree or